Custom Search
Turn on power to the units.
Interconnection directly, or by way of other apparatus, of ports marked "X" with ports marked or not so marked may produce hazardous conditions on the network.
Be sure that the power drawn by the unit is within the rating of the power supply.
For details on the cabling pin-outs required see Appendix 2.
Check that the power rating on the device label matches that of the power supply you are about to connect to.
Air flow around the fitting should not be restricted.
Note minimum distances to adjacent surfaces.
These products should be fused at a maximum of 5A.
Go to main page for English language usage