Custom Search
If you choose not to connect a signal processor to the FX loop, you may connect another instrument.
Never run the amp without a load.
Double-check that the module and the connectors are seated correctly.
If you encounter these problems, replace the tubes.
We recommend you refrain from exchanging tubes solely for sound experimentation purposes. First of all, this may end up damaging your amp. Besides, we tested every conceivable tube option and installed the tube types for the best possible performance.
Set input tubes with minimum microphonic properties and lowest noise levels by conducting a simple listening test.
Ensure the cooling vents at the top of the housing are not obstructed during operation.
Go to main page for English language usage